1 of 10 optimum technology matching ? applied gaas hbt ingap hbt gaas mesfet sige bicmos si bicmos sige hbt gaas phemt si cmos si bjt gan hemt functional block diagram rf micro devices?, rfmd?, optimum technology matching?, enabling wireless connectivity?, powerstar?, polaris? total radio? and ultimateblue? are trademarks of rfmd, llc. bluetooth is a trade- mark owned by bluetooth sig, inc., u.s.a. and licensed for use by rfmd. all other trade names, trademarks and registered tradem arks are the property of their respective owners. ?2006, rf micro devices, inc. product description 7628 thorndike road, greensboro, nc 27409-9421 for sales or technical support, contact rfmd at (+1) 336-678-5570 or sales-support@rfmd.com. rf mems ldmos RFMD0014 direct quadrature modulator the RFMD0014 is direct quadrature modulator for use in cellular base stations and other communications systems. RFMD0014 supports cellu- lar, 3g, wimax, and lte air interface standards. this device features oper- ation from 700 mhz to 1000 mhz with excellent carrier and sideband suppression and ultra low noise floor. the device is manufactured in an advanced gaas hbt process. the RFMD0014 operates from a single 5 v supply and is packaged in a low cost, 4 mm x 4 mm, 24-pin leadless pack- age. features ? acpr performance: -70 dbc typ. for 1-carrier wcdma ? very high linearity: +26 dbm oip3 ? very low noise floor: -160 dbm/hz ? high output power: +12 dbm p1db ? typical carrier feed-through: <-40 dbm ? single-ended or differential lo drive ? typical sideband suppression: <-40 dbc ? single +5 v supply ? small 24-pin, 4 mm x 4 mm, qfn applications ? cellular, 3g infrastructure ? wibro, wimax, lte ? wlan or wll systems ? gmsk, qpsk, dqpsk, qam modulation ds100819 ? package: qfn, 24-pin, 4mm x 4mm RFMD0014 direct quadra- ture modulator
2 of 10 RFMD0014 ds100819 7628 thorndike road, greensboro, nc 27409-9421 for sales or technical support, contact rfmd at (+1) 336-678-5570 or sales-support@rfmd.com. absolute maximum ratings parameter rating unit supply voltage 5.5 v lo input +10 dbm operating temperature -40 to +85 c storage temperature -65 to +150 c maximum junction temperature +150 c power dissipation 1200 mw bb cm voltage 1.8 v thermal resistance 28 c/w esd class 1c (1000 v) parameter specification unit condition min. typ. max. general supply voltage 4.75 5 5.25 v supply current 166 185 204 ma rf output rf frequency range 700 1000 mhz carrier feed through -40 dbm uncalibrated sideband suppression -40 db uncalibrated oip3 23 26 dbm baseband input 800 m v pp , 20 khz ? rf port return loss 15 db p out -3 0 3 dbm baseband input 800 m v pp, cw quadrature acp -70 dbc rf output -10 dbm, 1 carrier wcdma broadband noise floor -160 dbm/hz 20 mhz offset, bb o v pp output power flatness 0.25 db over 60 mhz bw p1db 9 12 dbm lo input lo frequency range 700 1000 mhz lo input power -3 0 3 dbm return loss 15 db bb inputs i/q input frequency range dc 300 mhz bb input impedance 600 ? differential impedance common mode voltage 1.5 v note: typical performance at nominal conditions unless otherwise noted: vcc = +5 v, temperature = +25c, baseband cm voltage = +1.5 v, lo frequency = 900 mhz, lo power = 0 dbm, single-ended caution! esd sensitive device. exceeding any one or a combination of the absolute maximum rating conditions may cause permanent damage to the device. extended application of absolute maximum rating conditions to the device may reduce device reliability. specified typical perfor- mance or functional operation of the device under absolute maximum rating condi- tions is not implied. rohs status based on eu directive 2002/95/ec (at time of this document revision). the information in this publication is believed to be accurate and reliable. however, no responsibility is assumed by rf micro devices, inc. ("rfmd") for its use, nor for any infringement of patents, or other rights of third parties, resulting from its use. no license is granted by implication or otherwise under any patent or patent rights of rfmd. rfmd reserves the right to change component circuitry, recommended appli- cation circuitry and specifications at any time without prior notice.
3 of 10 RFMD0014 ds100819 7628 thorndike road, greensboro, nc 27409-9421 for sales or technical support, contact rfmd at (+1) 336-678-5570 or sales-support@rfmd.com. pin function description 1nc no connection. 2 gnd rf/dc ground connection. 3lop local oscillator differential input. 4lon local oscillator differential input. connect to ground when using lop input in single ended mode. 5 gnd rf/dc ground connection. 6nc no connection. 7nc no connection. 8 gnd rf/dc ground connection. 9qn q channel differential baseband input. 10 qp q channel differential baseband input. 11 gnd rf/dc ground connection. 12 gnd rf/dc ground connection. 13 nc no connection. 14 gnd rf/dc ground connection. 15 nc no connection. 16 rfout rf single-ended output. 17 gnd rf/dc ground connection. 18 vcc2 5 v supply. 19 gnd rf/dc ground connection. 20 gnd rf/dc ground connection. 21 ip i channel differential baseband input. 22 in i channel differential baseband input. 23 gnd rf/dc ground connection. 24 vcc1 5 v supply.
4 of 10 RFMD0014 ds100819 7628 thorndike road, greensboro, nc 27409-9421 for sales or technical support, contact rfmd at (+1) 336-678-5570 or sales-support@rfmd.com.
5 of 10 RFMD0014 ds100819 7628 thorndike road, greensboro, nc 27409-9421 for sales or technical support, contact rfmd at (+1) 336-678-5570 or sales-support@rfmd.com.
6 of 10 RFMD0014 ds100819 7628 thorndike road, greensboro, nc 27409-9421 for sales or technical support, contact rfmd at (+1) 336-678-5570 or sales-support@rfmd.com.
7 of 10 RFMD0014 ds100819 7628 thorndike road, greensboro, nc 27409-9421 for sales or technical support, contact rfmd at (+1) 336-678-5570 or sales-support@rfmd.com.
8 of 10 RFMD0014 ds100819 7628 thorndike road, greensboro, nc 27409-9421 for sales or technical support, contact rfmd at (+1) 336-678-5570 or sales-support@rfmd.com. evaluation board schematic note: evaluation board configured for single-ended lo drive using lop connector. terminate the lon pin to ground near the package.
9 of 10 RFMD0014 ds100819 7628 thorndike road, greensboro, nc 27409-9421 for sales or technical support, contact rfmd at (+1) 336-678-5570 or sales-support@rfmd.com. evaluation board layout
10 of 10 RFMD0014 ds100819 7628 thorndike road, greensboro, nc 27409-9421 for sales or technical support, contact rfmd at (+1) 336-678-5570 or sales-support@rfmd.com. package drawing qfn, 24-pin, 4mm x 4mm branding diagram ordering information ordering code description RFMD0014sq sample bag with 25 pieces RFMD0014sr 7" reel with 100 pieces RFMD0014tr7 7" reel with 1500 pieces RFMD0014tr13 13" reel with 2500 pieces RFMD0014pck-410 700mhz to 1000mhz pcba with 5-piece sample bag
|
